Top Ten Market Products
What to build for craft fairs and Christmas markets. The goal is a table that sells: a few cheap impulse items, a solid middle of gift-priced pieces, and one or two “hero” pieces that draw people in.
Numbers are planning estimates, not market data. Prices, material costs and build times below are my own rough figures for a small one-person shop selling at regional craft markets. Replace them with your own after the first market, using real receipts and a stopwatch. Check booth fees and your state’s sales-tax rules before the first sale. This is not tax advice, so talk to a CPA about how a hobby-versus-business classification affects deductions.
The ten, ranked
Ranked by how well each fits a table at a market: sells fast, builds in batches, uses cheap stock and ships nowhere.
| # | Product | Price | Materials | Build time | Why it sells |
|---|---|---|---|---|---|
| 1 | Mitered picture frames | $25–60 | $4–10 | 30–45 min (batch) | Cheap to make, everyone needs one, easy upsell |
| 2 | Cutting and serving boards | $35–90 | $8–25 | 45–90 min (batch) | Top gift category; people pick them up and handle them |
| 3 | Birdhouses and nest boxes | $25–50 | $5–12 | 45–60 min | Scrap-friendly, and kids and grandparents both buy them |
| 4 | Wall boxes (“pipe box” / salt box) | $45–85 | $8–20 | 1.5–2.5 h | Distinctive look, and you can make them in several finishes |
| 5 | Small ornaments and stocking stuffers | $6–20 | $0.50–3 | 5–15 min | Impulse buys that fill the gaps in a sale |
| 6 | Shaker peg rails and wall shelves | $35–75 | $8–25 | 45–90 min | Fast, classic, easy to display on your booth wall |
| 7 | Step stools | $45–95 | $10–25 | 1.5–2 h | Useful, sturdy, and good for kids and kitchens |
| 8 | Small keepsake boxes | $50–120 | $12–35 | 2–4 h | Higher price point, feels like “real” woodworking |
| 9 | Serving trays and carry totes | $40–85 | $10–25 | 1–2 h | Seasonal, and they use the same stock as the boards |
| 10 | Entryway bench (the hero piece) | $175–350 | $45–90 | 5–8 h | Draws a crowd; one sale covers the booth fee |
Mix to aim for: roughly 50% of units from items 5, 1 and 3 (impulse), 35% from items 2, 4, 6 and 9 (gifts), and a few pieces from items 7, 8 and 10 (hero). Most of the revenue still comes from the middle.
1. Mitered picture frames
You already have the dimensioned plan: Mitered Picture Frame, 1¼″ × ⅞″ profile.
- Cut a standard size run: 5×7, 8×10, 11×14 and 16×20. People buy to a size they already own a photo or print for.
- Offer two or three species or stains (maple, walnut, cherry or oak). Contrast is what makes a rack of frames read well.
- Batch the work: mill all stock at once, cut all miters on one stop-block setting, then glue up in sets of four.
- Sell them with a cheap mat and backer already fitted. Frames with glass sell for more, but glass breaks in transit, so sell glass-free frames with an acrylic option.
2. Cutting and serving boards
- Edge-grain boards in maple, walnut and cherry are the easy volume. End-grain boards sell for more but cost more time and glue-up risk.
- Use food-safe finishes only: mineral oil with beeswax. Say so on a small tag. Avoid exotic woods with irritant dust or unknown food safety.
- Batch: glue up six to eight blanks at once, then do all the roundovers, handle holes and finishing in one pass.
- Sell a board with a small tin of board butter as a bundle. The margin on the add-on is high.
3. Birdhouses and nest boxes
- Decide whether each one is decorative or functional and label it. A functional nest box needs the right hole size, no perch, ventilation and drain holes, and a way to open it for cleaning. Wren, chickadee and bluebird boxes have different hole diameters, so check a reliable source (the NABS or Audubon plans) before you cut.
- Cedar or cypress needs no finish and weathers well. Pine plus a nice finish suits the decorative ones.
- Cut kits from a single template: one pattern board, one stop setting, and a pocket of screws makes these fast.
4. Wall boxes (“pipe box” / salt box)
A salt box has a sloped, hinged lid over a small box, and a pipe box has an open rack above a small drawer. Both are the same idea: a small box with a shaped back plate that hangs on a wall.
- Typical size is about 5–7″ wide, 14–18″ tall and 4–5″ deep, with a scalloped or ogee back and either a hinged lid or an open front.
- Sell them as candle boxes, salt boxes, key holders or wall storage. The same body can carry four different labels.
- Vary the back shape (ogee, scallop, flat-top) and sell them in cherry, walnut or painted pine.
- One jig for the shaped back saves the most time here. A bandsaw template plus a spindle or drum sander gets repeatable curves.
5. Ornaments and stocking stuffers
This is the cheap category that earns more than it looks like it should at Christmas markets.
- Ideas: scroll-saw or laser-cut ornaments, turned or lathe-made tree toppers, wooden spoons and spatulas, bottle stoppers, keychains, coasters, small cheese knives and ring-toss games.
- Use cutoffs and offcuts from items 1 to 4. This is where the scrap pays for itself.
- Price in round numbers ($6, $10, $15, $20) so cash and card handling stays fast. Put a basket at the front of the table.
6. Peg rails and wall shelves
- Shaker peg rails (a 24–36″ board with 4–6 pegs) are one of the fastest products to make, and they look right on a rail hung on your booth wall.
- Small ledge shelves, plate rails and key-and-mail racks use the same stock and tooling.
- Buy turned pegs by the hundred rather than making them. It saves hours.
7. Step stools
- A two-step stool in pine or poplar costs little, and a well-built one in oak or ash is a “forever” piece.
- A kids’ step stool with a hand hole also sells well. Round every edge, check the stability, and keep finishes non-toxic.
- Design for load: use thick enough stretchers and glue plus screws or dowels at every joint. These items get stood on, so do not skimp.
8. Small keepsake boxes
- Keep it simple: butt or mitered corners with splines, a lift-off or hinged lid, and a nice finish. Add a felt or velvet liner if you want a higher price.
- Sell them in maple, walnut and cherry with contrasting splines. They show your skill and sell as gifts.
- Time is the cost here, so make only a few. They also work as a showcase for the booth.
9. Serving trays and totes
- A flat-bottom serving tray with cut-out handles and a simple tote or caddy (tool, cutlery, garden, picnic) share stock and techniques with the boards.
- The drawing shows a cheese tray. It makes sense around the holidays: a cheese tray, a coffee-and-tea tray or a wine caddy.
10. Economical entryway bench
Your largest piece, and it should be a display anchor, not a volume item. A person who stops for the bench ends up buying a frame as well.
- Keep it affordable to build: a 36–48″ pine, poplar or ash bench with a plank top, apron and four legs, or a slab top with simple stretchers. About $45–90 in lumber.
- Use simple, strong joinery: pocket screws plus glue, or mortise-and-tenon if you want to show off. Match the joinery to the price.
- Build two for the season, not ten. Take photos and offer to build to order in a different finish or size.
- Related existing plans on this site: the Shaker coffee table and the console plans can be adapted into higher-ticket commissions.
3D-printed draw-ins and hybrids
You have a printer, so use it for two jobs: traffic builders that get people to the table, and print + wood hybrids that sit in the gift tier. Print-and-forget items also run while you build everything else.
Small printed pieces for sale are fine, but check any model licence before selling prints. Many free STLs are personal-use only, so print your own designs (see the parametric tools already on this site) or models whose licence allows commercial use.
Free or near-free draw-ins
These cost cents each and give someone a reason to stop and talk.
| Item | Cost each | Print time | How to use it |
|---|---|---|---|
| Fidget spinner or print-in-place fidget | $0.20–0.60 | 20–60 min | Free with any purchase, or “free if you tell me what you’d make” |
| Bottle-opener or keychain with your logo and QR code | $0.30–0.80 | 15–30 min | Free giveaway; the QR links to your page or newsletter |
| Print-in-place flexi animals | $0.20–0.50 | 30–60 min | Kid magnet; parents stop too |
| Business-card holder or coaster with logo | $0.40–1.00 | 30–60 min | Gives your card a reason to be kept |
- Keep giveaways cheap and fast. Print a batch the night before on a multi-part plate. Count on 2–3× more than you hand out, since some get taken without a conversation.
- Always attach a card or QR code. A free item with no way back to you is just a cost.
- One per person, with a sign. “Free fidget with any purchase” protects margin; “free fidget, ask me how it’s made” brings in the curious.
- Do not skip safety. For anything kids may mouth, avoid tiny loose parts and sharp edges, and sand or deburr every print.
Print + wood hybrids to sell
| Item | Price | Wood part | Printed part |
|---|---|---|---|
| Desk phone stand | $18–30 | Maple or walnut block, routed slot | Printed angle insert or cable guide |
| Pen and phone caddy | $25–40 | Turned or squared base | Printed dividers |
| Bottle stoppers | $10–18 | Turned or sawn wooden top | Printed core or decorative cap |
| Name-sign or house-number plaque | $30–65 | Cedar or walnut board | Printed raised letters or logo, painted |
| Coaster set in a wooden holder | $22–40 | Small wooden stand | Printed inserts in school or team colours |
| Wall hook rail | $25–45 | Maple board (see the peg rail above) | Printed hooks in custom shapes |
| Birdhouse accessories | $8–15 | (sold with item 3) | Printed predator guard, hanging bracket |
| Tool and jig sets | $20–60 | Hardwood base | Printed fences, holders (reuse shop designs) |
- Use print where wood is worst: curves, repeated small parts, text and logos. Use wood where it shows: bases, boards, faces.
- Personalisation sells. A printed name or number on a wooden plaque lets you charge more and make to order. Take orders at the market and deliver the next week.
- Be honest on the tag. Label “wood and 3D-printed” so nobody feels misled; many buyers like the mix.
Making the numbers work
- Price floor: a common rule of thumb is price ≥ 2–3× materials plus your time at a minimum hourly rate you choose. If an item cannot clear that at a price the market will pay, cut it.
- Track from day one: log each sale, each material receipt, booth fees, mileage and show-specific costs in one sheet. Good records matter for any tax treatment.
- Time per unit drops with batches. The times above assume batch work. A one-off takes 2–3× longer.
- Test first: take about 40 pieces to a small market before investing in a big run, and note what people pick up and what they buy.
A starting plan for this season
Christmas markets are weeks away, so start with the quick builds and add the rest after your first market.
- Week 1: frames (1), ornaments (5), peg rails (6), and a batch of printed giveaways. Fast, uses stock you already have.
- Week 2: boards (2), birdhouses (3), trays (9).
- Week 3+: wall boxes (4), step stools (7), and the bench (10) if time allows.
Open questions
- Which markets, and what are the booth fees and dates?
- Is there an existing shop capacity limit (how many hours a week)?
- Do you want to stay food-safe-only for boards, or also sell decorative ones?
- Which species can you source cheaply and locally?